Because there is no track in the workshop, there is no need for a flat car. Therefore, there is no free track in the workshop, so it can be used in any corner. There are still certain requirements for operators.
If the trackless rubber tyred electric flat car wants to operate skillfully, it needs to operate in strict accordance with the operating instructions.
For the operation requirements of general trackless electric flat car, the slope of the flat car up and down the slope shall not be greater than 3 degrees (except for special vehicles). The flat car shall avoid rotating in situ when turning, and it is forbidden to reverse when the flat car does not stop. For flat cars with special requirements, such as rocker control direction, flat car with display screen and other special requirements, when turning, just gently move the rocker. Don't use too much force to prevent the rocker from breaking.
For flat cars with touch screen, the parameters in the touch screen have been set in the factory. Non operators are not allowed to change the parameters in the system without permission. For better use of trackless rubber tyred electric flat car, please read the manual in detail.
With an annual production capacity of more than 600 sets, the company is a manufacturer specializing in the production of battery cars, flat trailers, electric flat cars and rail cars. Consultation method:
Address: No. 68, Wuxing village, Qiaosi street, Linping District, Hangzhou